Feedback from consumers TD "FLATTER" - Oil and gas industry

2

 

The «bucket-brush» cleaning method is widely used in the oil refining industry, but is not effective enough with high requirements for the quality of washing and industrial sanitation. In addition, this is a very labor-intensive process, requiring a large consumption of detergents, time for surface treatment and a large staff. However, thanks to the Flutter detergent, we were able to achieve the following results:

- effectively remove old complex deposits from the inner surfaces of tanks used for long-term storage of various petroleum products (lubricants);
- clean the oily concrete floor, which was not previously possible with more than one detergent;
- at the site for the production of special lubricants, it was possible to clean the metal containers used for the preparation of soot lubricants;
- save detergent by 3-5 times compared to traditional detergents («nefras», kerosene);
- reduce labor costs and reduce surface treatment time.

«Flatter» has been tested in manual washing mode:

- Cleaning the outer surface of the used plunger from the crust of oil products and paraffin;
- Preparation of the surface of the slurry-suspension pump for painting with subsequent painting;
- Preparation of drill string sub threads for cold phosphate coating followed by cold phosphate coating;
- Degreasing the surface of a cylinder fragment for nitriding, followed by nitriding.

Results:

- The product coped with its task well in all 4 cases, while it does not have a pronounced ammonia smell, and does not have a harmful effect on the skin of the hands.
- A negative factor is the need to use warm water t 50° C.
- Recognize «Flatter» as suitable for use in accordance with TC 2383-001-18295651-2001 and TC 2381-001-89507819-2008.
- It is also recommended for use in flushing the interlock threads of subs and pipes at the delivery site.